Tweet
Torq 2.0 gebruikers kunnen nu hun software updaten naar versie 2.0.2, want M-Audio heeft een update uitgebracht.
In deze update is onder meer ondersteuning gekomen voor Numark MIDI-controllers. De NS6, MixTrack en MixTrack PRO kunnen nu moeiteloos aan de software gekoppeld worden.
Een volledige lijst met release notes:
Verder zijn er nog diverse 'known issues' waar nu een workaround, tip of oplossing voor is.
De update is hier te downloaden!
In deze update is onder meer ondersteuning gekomen voor Numark MIDI-controllers. De NS6, MixTrack en MixTrack PRO kunnen nu moeiteloos aan de software gekoppeld worden.
Een volledige lijst met release notes:
Updated compatibility with Mac OSX 10.6.7 and 10.6.8
TRQ-259 - FLAC and OGG files are now supported
TRQ-724 - The Master BPM can be edited using Shift click + keyboard
TRQ-865 - Fixed: One shot samples re-trigger if the same sample is loaded or unloaded to or from a deck while the sampler
is engaged
TRQ-1204 - Improved Control Vinyl start and stop behavior when using Torq decks in External Control mode
TRQ-1502 - Improved deck synchronization behavior when using the Reverse effect
TRQ-1814 - Fixed: Play speed/state setting of a deck receiving a 'Double' from a track that is paused under External Control
TRQ-2065 - You can now scroll though Snapshots using either a trackpad or the wheel on your mouse
TRQ-2118 - The VST scanning window can be disabled by setting both VST directory searches to “No”
TRQ-2298 - Ctrl+Quick Cue now relocates a deck to the Quick Cue location in a paused state.
TRQ-2373 - Improved stability and error handling during track analysis
TRQ-2419 - Fixed: Manual Setup no longer defaults single input devices to External Control Input for any decks.
TRQ-2504 - Improved support when using multiple MIDI controller of the same make and model
TRQ-2505 - Edits made in the Database are no longer lost for WAV and AIF files in iTunes while audio files are being analyzed
TRQ-2528 - Shaffel and Hide Grid preferences are now saved whenever Torq is closed and relaunched
TRQ-2533 - Fixed some situations where loading a track causes the browser selection to loose focus
TRQ-2546 - Fixed an issue where anchored tracks play back at the wrong speed when disabling the Flatten button
TRQ-2560 - Pressing “Esc” while renaming or reassigning Snapshots now cancels the action, and leaves the Snapshot
unchanged
TRQ-2574 - The Deck BPM field is now right-clickable on a single button mouse as well as the Trackpad in Mac OSX
TRQ-2650 - Toggle buttons now work as expected
TRQ-2678 - Fixed: Compatibility issue when using two Numark V7 configuration.
TRQ-2679 - Crossfader hard cut has been improved for better performance while scratching
TRQ-2685 - Inclusion of Sampler load to Deck 4 (Deck D) functionality in the Controller Assignments page
TRQ-2690 - Fixed an issue where a counter clockwise turn of certain rotary encoder types is less sensitive than when the
encoder is turned clockwise
TRQ-2696 - Numark Mixtrack, Mixtrack Pro, and NS6 are now supported
TRQ-2700 - Cancelled snapshots now redraw correctly
TRQ-2708 - Fixed an issue that may cause Numark V7 and NS7 controllers to reset tracks to the beginning
There have been additional improvements in the following areas:
• Various Database improvements, including better management of the BPM and Metadata fields
• Improved Engine stability, including during file analysis
TRQ-2713 - Fixed: An issue which disabled HyperEffects integration.
TRQ-259 - FLAC and OGG files are now supported
TRQ-724 - The Master BPM can be edited using Shift click + keyboard
TRQ-865 - Fixed: One shot samples re-trigger if the same sample is loaded or unloaded to or from a deck while the sampler
is engaged
TRQ-1204 - Improved Control Vinyl start and stop behavior when using Torq decks in External Control mode
TRQ-1502 - Improved deck synchronization behavior when using the Reverse effect
TRQ-1814 - Fixed: Play speed/state setting of a deck receiving a 'Double' from a track that is paused under External Control
TRQ-2065 - You can now scroll though Snapshots using either a trackpad or the wheel on your mouse
TRQ-2118 - The VST scanning window can be disabled by setting both VST directory searches to “No”
TRQ-2298 - Ctrl+Quick Cue now relocates a deck to the Quick Cue location in a paused state.
TRQ-2373 - Improved stability and error handling during track analysis
TRQ-2419 - Fixed: Manual Setup no longer defaults single input devices to External Control Input for any decks.
TRQ-2504 - Improved support when using multiple MIDI controller of the same make and model
TRQ-2505 - Edits made in the Database are no longer lost for WAV and AIF files in iTunes while audio files are being analyzed
TRQ-2528 - Shaffel and Hide Grid preferences are now saved whenever Torq is closed and relaunched
TRQ-2533 - Fixed some situations where loading a track causes the browser selection to loose focus
TRQ-2546 - Fixed an issue where anchored tracks play back at the wrong speed when disabling the Flatten button
TRQ-2560 - Pressing “Esc” while renaming or reassigning Snapshots now cancels the action, and leaves the Snapshot
unchanged
TRQ-2574 - The Deck BPM field is now right-clickable on a single button mouse as well as the Trackpad in Mac OSX
TRQ-2650 - Toggle buttons now work as expected
TRQ-2678 - Fixed: Compatibility issue when using two Numark V7 configuration.
TRQ-2679 - Crossfader hard cut has been improved for better performance while scratching
TRQ-2685 - Inclusion of Sampler load to Deck 4 (Deck D) functionality in the Controller Assignments page
TRQ-2690 - Fixed an issue where a counter clockwise turn of certain rotary encoder types is less sensitive than when the
encoder is turned clockwise
TRQ-2696 - Numark Mixtrack, Mixtrack Pro, and NS6 are now supported
TRQ-2700 - Cancelled snapshots now redraw correctly
TRQ-2708 - Fixed an issue that may cause Numark V7 and NS7 controllers to reset tracks to the beginning
There have been additional improvements in the following areas:
• Various Database improvements, including better management of the BPM and Metadata fields
• Improved Engine stability, including during file analysis
TRQ-2713 - Fixed: An issue which disabled HyperEffects integration.
Known Issues
Operating Systems
Mac and Windows
TRQ-1473 - Mac and Windows: Two separate processes are running when Torq is launched
Torq appears as two different processes in the Activity Monitor (Mac OS X) or the process tab in the Task Manager (Windows).
This is correct behavior as Torq has a dedicated processes for audio playback. If one of these processes ends unexpectedly,
there is a chance that the second one may still continue running. If this happens, either restart your computer or kill the process
before restarting Torq.
TRQ-1607 - Certain screen savers may negatively affect Torq performance
Because some 3rd party screen savers may adversely affect Torq's performance, we recommend disabling your screen saver
when using Torq in a performance environment.
Mac Only
TRQ-1021 - Mac OSX: Control Assignment Page - Assignments Editor - References to the Control (Ctrl) key
All references to the Control key (Ctrl) in the Assignments Editor, under the Conditions pop-up menus, translate to the Command
key on your mac keyboard.
TRQ-2130 - Mac: Unplugging an iPod while Torq is running does not remove it from beneath the “iPods” Index listing
When unplugging an iPod from Torq, the iPod directory will remain in the file view.
Windows Only
TRQ-2042 - Windows: System font multiplier makes the GUI fonts larger and “cut off”
The Windows System font multiplier affects Torq fonts, causing some dialog boxes and icons to display incorrectly. If your
font multiplier is not set to 100%, go to “Control Panel > All Control Panel Items > Display” to change the setting, and then
restart your system.
TRQ-2330 - Windows: MIDI devices require a multi-client driver to operate directly with Torq 2.0 when ReWired
When using Torq as a ReWire slave to a host application, MIDI devices and interfaces must have a multi-client driver in order
to work directly with both Torq 2.0 and the host application. If the device is class compliant, you will only be able to send
MIDI to Torq through a rewire channel. This means that any MIDI mappings or preset functionality that was set up when
Torq was used as a standalone program will not work under Rewire. If your MIDI device has a multi-client MIDI driver, please
download and install the latest compatible version.
TRQ-2333 - On certain Windows systems, Torq Xponent will not be seen by Torq 2.0 while the application is slaved to Pro
Tools via ReWire
To work around this issue, open Pro Tools, connect Xponent, and then launch the Torq Rewire channel.
Torq Performance
TRQ-592 - Decks are not updated in real time when editing the same “.tqd” file on multiple decks
If a song is loaded onto multiple Decks, and Tempo Anchors are edited on one of the Decks, the edits will be saved to the last
Deck that is either unloaded, or that has a new song loaded on top of its original track. Please keep this in mind when performing
Tempo Anchor edits. In this instance, it is recommended that only one instance of the song should be loaded onto
a deck.
TRQ-749 - Using a Numark controllers with motorized platters may cause increased CPU load on some computer systems
On certain systems, using the motorized platter/scratching on the Numark NS7 may result in higher CPU usage than when
motors are off. Increase the buffer size or disable the platter if you can hear pops or clicks in the audio signal.
TRQ-1700 - iPod Touch, iPhone, and iPod Nano 5g are not currently supported for Database connectivity
As of the initial Torq 2.0 release, the iPod Touch, iPhone, and iPod Nano 5g are not currently supported for Database connectivity.
TRQ-1827 - Message “Would you like to move the songs in the sub crate to the parent crate?” appears when there isn’t a
parent crate
The message “Would you like to move the songs in the sub crate to the parent crate?” when there isn’t a parent crate can be
ignored. The songs will be removed regardless of which button is clicked.
TRQ-2029 - When closing Torq, the program may crash if an iPod is unplugged while a song is being played or previewed
from the device
If an iPod is unplugged while a track is being played from it, Torq may crash upon quit.
TRQ-2132 - On the Controller Assignment page, the Decks names are 1,2,3,4 instead of A,B,C,D
TRQ-2135 - Certain audio files may take longer to load in decks
Certain audio files may take up to 4 seconds to load in a deck.
TRQ-2149 - BPM display may not update when the speed slider is set to -100%
Moving the Speed adjust slider to -100% may result in the tempo display not reading 0 BPM. The proper BPM will appear once
the slider is moved away from -100%.
TRQ-2291 - Changes made to a song's metadata are not saved when the track is loaded onto a deck
Torq updates song information when it is loaded onto a deck. Because of this, any modifications made to a song after it is
loaded in a deck will be over-written when the song is unloaded, or if another song is loaded on top of it. In order for edits
to be saved, they must be made before the song is loaded.
TRQ-2416 - Adjusting the buffer size while Traq Morph is engaged causes the original track audio to play in conjunction with
“Traq-Morphed” audio
Disable and re-enable track morph to correct the behavior.
TRQ-2531 - When the mixer is hidden, updating the color scheme does not update some center effects colors
Show and hide the mixer to correct issue.
TRQ-2564 - Playlists inherit column ordering from folders or database
To reset, shift double click a column to reset playlist to default order
TRQ-2583 - In some circumstances, anchored tracks will not visually sync correctly sync to other tracks to the left and right
of the now line
Audio sync is not affected.
TRQ-2584 - When using wave or aiff files that are higher than 44.1 kHz, runout protection will engage earlier than expected
Runout protection time is proportionate to how high the sample rate is above 44.1 kHz.
TRQ-2612 - Image Line Gross Beat VST plug-in does not function properly in Torq 2.0.2
TRQ-2736 - To use 2 Denon DNS3700 with Torq, both of controllers should be assigned to MIDI Channel “1”
This configuration may differ from other software. Please consult your Denon DNS3700 manual on how to configure your devices.
TRQ-2740 - Resetting the Controller Assignments on a Denon DNS-3700 may load selected tracks listed in the browser
Operating Systems
Mac and Windows
TRQ-1473 - Mac and Windows: Two separate processes are running when Torq is launched
Torq appears as two different processes in the Activity Monitor (Mac OS X) or the process tab in the Task Manager (Windows).
This is correct behavior as Torq has a dedicated processes for audio playback. If one of these processes ends unexpectedly,
there is a chance that the second one may still continue running. If this happens, either restart your computer or kill the process
before restarting Torq.
TRQ-1607 - Certain screen savers may negatively affect Torq performance
Because some 3rd party screen savers may adversely affect Torq's performance, we recommend disabling your screen saver
when using Torq in a performance environment.
Mac Only
TRQ-1021 - Mac OSX: Control Assignment Page - Assignments Editor - References to the Control (Ctrl) key
All references to the Control key (Ctrl) in the Assignments Editor, under the Conditions pop-up menus, translate to the Command
key on your mac keyboard.
TRQ-2130 - Mac: Unplugging an iPod while Torq is running does not remove it from beneath the “iPods” Index listing
When unplugging an iPod from Torq, the iPod directory will remain in the file view.
Windows Only
TRQ-2042 - Windows: System font multiplier makes the GUI fonts larger and “cut off”
The Windows System font multiplier affects Torq fonts, causing some dialog boxes and icons to display incorrectly. If your
font multiplier is not set to 100%, go to “Control Panel > All Control Panel Items > Display” to change the setting, and then
restart your system.
TRQ-2330 - Windows: MIDI devices require a multi-client driver to operate directly with Torq 2.0 when ReWired
When using Torq as a ReWire slave to a host application, MIDI devices and interfaces must have a multi-client driver in order
to work directly with both Torq 2.0 and the host application. If the device is class compliant, you will only be able to send
MIDI to Torq through a rewire channel. This means that any MIDI mappings or preset functionality that was set up when
Torq was used as a standalone program will not work under Rewire. If your MIDI device has a multi-client MIDI driver, please
download and install the latest compatible version.
TRQ-2333 - On certain Windows systems, Torq Xponent will not be seen by Torq 2.0 while the application is slaved to Pro
Tools via ReWire
To work around this issue, open Pro Tools, connect Xponent, and then launch the Torq Rewire channel.
Torq Performance
TRQ-592 - Decks are not updated in real time when editing the same “.tqd” file on multiple decks
If a song is loaded onto multiple Decks, and Tempo Anchors are edited on one of the Decks, the edits will be saved to the last
Deck that is either unloaded, or that has a new song loaded on top of its original track. Please keep this in mind when performing
Tempo Anchor edits. In this instance, it is recommended that only one instance of the song should be loaded onto
a deck.
TRQ-749 - Using a Numark controllers with motorized platters may cause increased CPU load on some computer systems
On certain systems, using the motorized platter/scratching on the Numark NS7 may result in higher CPU usage than when
motors are off. Increase the buffer size or disable the platter if you can hear pops or clicks in the audio signal.
TRQ-1700 - iPod Touch, iPhone, and iPod Nano 5g are not currently supported for Database connectivity
As of the initial Torq 2.0 release, the iPod Touch, iPhone, and iPod Nano 5g are not currently supported for Database connectivity.
TRQ-1827 - Message “Would you like to move the songs in the sub crate to the parent crate?” appears when there isn’t a
parent crate
The message “Would you like to move the songs in the sub crate to the parent crate?” when there isn’t a parent crate can be
ignored. The songs will be removed regardless of which button is clicked.
TRQ-2029 - When closing Torq, the program may crash if an iPod is unplugged while a song is being played or previewed
from the device
If an iPod is unplugged while a track is being played from it, Torq may crash upon quit.
TRQ-2132 - On the Controller Assignment page, the Decks names are 1,2,3,4 instead of A,B,C,D
TRQ-2135 - Certain audio files may take longer to load in decks
Certain audio files may take up to 4 seconds to load in a deck.
TRQ-2149 - BPM display may not update when the speed slider is set to -100%
Moving the Speed adjust slider to -100% may result in the tempo display not reading 0 BPM. The proper BPM will appear once
the slider is moved away from -100%.
TRQ-2291 - Changes made to a song's metadata are not saved when the track is loaded onto a deck
Torq updates song information when it is loaded onto a deck. Because of this, any modifications made to a song after it is
loaded in a deck will be over-written when the song is unloaded, or if another song is loaded on top of it. In order for edits
to be saved, they must be made before the song is loaded.
TRQ-2416 - Adjusting the buffer size while Traq Morph is engaged causes the original track audio to play in conjunction with
“Traq-Morphed” audio
Disable and re-enable track morph to correct the behavior.
TRQ-2531 - When the mixer is hidden, updating the color scheme does not update some center effects colors
Show and hide the mixer to correct issue.
TRQ-2564 - Playlists inherit column ordering from folders or database
To reset, shift double click a column to reset playlist to default order
TRQ-2583 - In some circumstances, anchored tracks will not visually sync correctly sync to other tracks to the left and right
of the now line
Audio sync is not affected.
TRQ-2584 - When using wave or aiff files that are higher than 44.1 kHz, runout protection will engage earlier than expected
Runout protection time is proportionate to how high the sample rate is above 44.1 kHz.
TRQ-2612 - Image Line Gross Beat VST plug-in does not function properly in Torq 2.0.2
TRQ-2736 - To use 2 Denon DNS3700 with Torq, both of controllers should be assigned to MIDI Channel “1”
This configuration may differ from other software. Please consult your Denon DNS3700 manual on how to configure your devices.
TRQ-2740 - Resetting the Controller Assignments on a Denon DNS-3700 may load selected tracks listed in the browser