Tweet
Te Koop: Dynaudio BM5 Monitor Set incl. Stereo Studio Versterker
Superset voor in de Studio van Dynaudio, de BM5 passief!
In combinatie met de goede amp waanzinnig, de kenner weet genoeg.
Een enkele keer gebruikt in een dub-studio tbv voice-over producties (Dus geen House / Muziek op gemixt)
Luidsprekers zijn werkelijk in Nieuwstaat, inclusief alle toebehoren en originele verpakking!
icm Samson Servo 260 Studio Versterker.
Deze is ook zo goed als nieuw, incl. alle toebehoren, voedingkabel, handleiding en originele verpakking!
Altijd in Rack gezeten en gebruikt i.c.m. Dynaudio BM5 monitoren.
Richtprijs (complete set incl. versterker) € 599,-
The Dynaudio Acoustics nearfield monitor BM5 mkI is a 2-way passive system comprising a 175mm (6.5”)woofer and a 28mm (1.25“) soft dome tweeter with neodynium magnet, housed in a front ported cabinet
The BM5 mkI is a clean, powerful and accurate monitor where excellent results are achieved with good quality amplifiers.
The BM5 mkI is specifically designed for use in computer-based project studios where the monitor needs to be magnetically shielded. This is achieved by incorporating a high frequency soft dome driver that has a neodymium magnet housed within the aluminium voice coil to prevent its magnetic field from affecting computer monitors. It also has a port in the front baffle making it inherently suitable for mounting within an enclose area – i.e. surround channels for television post production.
Model
BM5 mkI
System
2-way Passive Nearfield Monitor
Frequency Response
(+/- 3 dB)
55 Hz - 29 kHz
Peak SPL 1m, pair
(IEC Short Term)
> 126 dB peak
Peak SPL 2m, 5.1
(IEC Short Term)
> 127.5 dB peak
Amplifier minimum
30 W (> 94 dB SPL @ 1m)
Sensitivity (2.83 V/1m)
87 dB
Impedance, Nominal
4 ohm
Impedance, HF (200 kHz)
10,4 ohm
Resonance Frequency
50 Hz
Internal Cabinet Volume
9,1 liters
Bass Principle
Bass reflex
Crossover Frequencies
4500 Hz
Crossover Slope
Tweeter 12 dB/oct
Tweeter
28 mm soft dome, Neodymium magnet, pure alu wire voice coil, magnetic shielded
Woofer
17 cm, One-piece molded polypropylene cone, 75 mm pure alu wire voice coil
Weight
5,7 kg
Dimensions (WxHxL)
204 x 310 x 252 mm
AMP
Samson Servo - 260
Servo-controlled stereo power amp in two rack spaces
Produces 130 watts per channel into 4 ohms
Extended 20 Hz To 50 kHz frequency response
Independent left/right input Level controls with 41 detents
Relay-controlled power-on circuitry avoids speakers "thumps"
Balanced 1/4" TRS inputs and unbalanced RCA inputs
1/4" and push-spring terminal outputs
Front-panel Clip and Idle LEDs on both channels
Bipolar circuit design
Convection-cooled design eliminates fan noise and maintenance
The 260 can be used to power near field monitors, passive headphone distribution systems in the studio and small live sound reinforcement setups. It is also a great choice for stereo keyboard or guitar amp setups with external mixer or preamps or amplifying a large screen TV or video system. The Servo 260 is dedicated to transparent audio, consistent performance and the rugged construction you need from a professional amplifier.
Servo-controlled stereo power amp in two rack spaces
Produces 130 watts per channel into 4 ohms
Extended 20 Hz To 50 kHz frequency response
Independent left/right input Level controls with 41 detents
Relay-controlled power-on circuitry avoids speakers "thumps"
Balanced 1/4" TRS inputs and unbalanced RCA input
s1/4" and push-spring terminal outputs
Front-panel Clip and Idle LEDs on both channels
Bipolar circuit design
Convection-cooled design eliminates fan noise and maintenance
In combinatie met de goede amp waanzinnig, de kenner weet genoeg.
Een enkele keer gebruikt in een dub-studio tbv voice-over producties (Dus geen House / Muziek op gemixt)
Luidsprekers zijn werkelijk in Nieuwstaat, inclusief alle toebehoren en originele verpakking!
icm Samson Servo 260 Studio Versterker.
Deze is ook zo goed als nieuw, incl. alle toebehoren, voedingkabel, handleiding en originele verpakking!
Altijd in Rack gezeten en gebruikt i.c.m. Dynaudio BM5 monitoren.
Richtprijs (complete set incl. versterker) € 599,-
The Dynaudio Acoustics nearfield monitor BM5 mkI is a 2-way passive system comprising a 175mm (6.5”)woofer and a 28mm (1.25“) soft dome tweeter with neodynium magnet, housed in a front ported cabinet
The BM5 mkI is a clean, powerful and accurate monitor where excellent results are achieved with good quality amplifiers.
The BM5 mkI is specifically designed for use in computer-based project studios where the monitor needs to be magnetically shielded. This is achieved by incorporating a high frequency soft dome driver that has a neodymium magnet housed within the aluminium voice coil to prevent its magnetic field from affecting computer monitors. It also has a port in the front baffle making it inherently suitable for mounting within an enclose area – i.e. surround channels for television post production.
Model
BM5 mkI
System
2-way Passive Nearfield Monitor
Frequency Response
(+/- 3 dB)
55 Hz - 29 kHz
Peak SPL 1m, pair
(IEC Short Term)
> 126 dB peak
Peak SPL 2m, 5.1
(IEC Short Term)
> 127.5 dB peak
Amplifier minimum
30 W (> 94 dB SPL @ 1m)
Sensitivity (2.83 V/1m)
87 dB
Impedance, Nominal
4 ohm
Impedance, HF (200 kHz)
10,4 ohm
Resonance Frequency
50 Hz
Internal Cabinet Volume
9,1 liters
Bass Principle
Bass reflex
Crossover Frequencies
4500 Hz
Crossover Slope
Tweeter 12 dB/oct
Tweeter
28 mm soft dome, Neodymium magnet, pure alu wire voice coil, magnetic shielded
Woofer
17 cm, One-piece molded polypropylene cone, 75 mm pure alu wire voice coil
Weight
5,7 kg
Dimensions (WxHxL)
204 x 310 x 252 mm
AMP
Samson Servo - 260
Servo-controlled stereo power amp in two rack spaces
Produces 130 watts per channel into 4 ohms
Extended 20 Hz To 50 kHz frequency response
Independent left/right input Level controls with 41 detents
Relay-controlled power-on circuitry avoids speakers "thumps"
Balanced 1/4" TRS inputs and unbalanced RCA inputs
1/4" and push-spring terminal outputs
Front-panel Clip and Idle LEDs on both channels
Bipolar circuit design
Convection-cooled design eliminates fan noise and maintenance
The 260 can be used to power near field monitors, passive headphone distribution systems in the studio and small live sound reinforcement setups. It is also a great choice for stereo keyboard or guitar amp setups with external mixer or preamps or amplifying a large screen TV or video system. The Servo 260 is dedicated to transparent audio, consistent performance and the rugged construction you need from a professional amplifier.
Servo-controlled stereo power amp in two rack spaces
Produces 130 watts per channel into 4 ohms
Extended 20 Hz To 50 kHz frequency response
Independent left/right input Level controls with 41 detents
Relay-controlled power-on circuitry avoids speakers "thumps"
Balanced 1/4" TRS inputs and unbalanced RCA input
s1/4" and push-spring terminal outputs
Front-panel Clip and Idle LEDs on both channels
Bipolar circuit design
Convection-cooled design eliminates fan noise and maintenance